Industrial news
What are the performances of the anti-Bite board?
The anti-Bite board has the following properties:
1. Durability: It can be used for a long time under normal conditions.
2. Non-flammable: The anti-Bite plate has a certain degree of flame retardancy, and the oxygen index is above 32.
3. Water resistance: boiled in boiling water for 2 hours without bubbling or delamination.
4. Easy to wash: the surface can be cleaned with common detergent (without abrasive), no damage to the surface.
5. Heat resistance: Use a hot oil bath at 180 °C for 20 minutes on the surface of the board, and there will be no bubbling or cracking on the surface.
6. Safety: Anti-Bite board is free from any harmful gases and substances, and is absolutely environmentally friendly and safe.
7. Abrasion resistance: The surface wear resistance can reach more than 1500 rpm. If you have special requirements, you can process products with wear resistance of more than 6000 rpm.
8. Impact resistance: a plate with a thickness greater than 2.0mm, with a diameter of 42.8mm +-0.2mm, a mass of 324g+5.0g polished steel ball, from the plate surface 100cm, free fall to the board surface, the board surface will No cracks will occur.
1. Durability: It can be used for a long time under normal conditions.
2. Non-flammable: The anti-Bite plate has a certain degree of flame retardancy, and the oxygen index is above 32.
3. Water resistance: boiled in boiling water for 2 hours without bubbling or delamination.
4. Easy to wash: the surface can be cleaned with common detergent (without abrasive), no damage to the surface.
5. Heat resistance: Use a hot oil bath at 180 °C for 20 minutes on the surface of the board, and there will be no bubbling or cracking on the surface.
6. Safety: Anti-Bite board is free from any harmful gases and substances, and is absolutely environmentally friendly and safe.
7. Abrasion resistance: The surface wear resistance can reach more than 1500 rpm. If you have special requirements, you can process products with wear resistance of more than 6000 rpm.
8. Impact resistance: a plate with a thickness greater than 2.0mm, with a diameter of 42.8mm +-0.2mm, a mass of 324g+5.0g polished steel ball, from the plate surface 100cm, free fall to the board surface, the board surface will No cracks will occur.
- Previous：
- nodata
Building A3, No. 462, Guiyue Road, Guanlan Street, Longhua District, Shenzhen
0755-23700937
Miss Xie 13590316991
982473173@qq.com
Attention